The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums. Upon completing this course, you will be able to: 1. Outline the composition of the Arduino development board 2. Describe what it means to program the board's firmware 3. Read board schematics 4. Install Arduino IDE 5. Describe what "shields" are and how they are used 6. Specify the role of libraries in the use of shields 7. Compile and run a program 8. Name C Variables and Types 9. Name common C operators 10. Use conditionals and loops 11. Explain functions, their definition and invocation 12. Explain the implications of global variables 13. Undertake the Arduino build process 14. Describe the role of the tools behind the IDE 15. Describe how to invoke functions in classes 16. Explain the structure of an Arduino sketch 17. Access the pins of the Arduino 18. Differentiate between digital and analog pin 19. Debug embedded software 20. Explain the importance of controllability and observability in the debugging process 21. Describe common debugging architectures for embedded systems 22. Explain how the UART Serial communication protocol works 23. Describe how the Arduino Serial library performs serial communication
このコースはAn Introduction to Programming the Internet of Things (IOT) の専門講座に属します。
The Arduino Platform and C Programming
提供：
An Introduction to Programming the Internet of Things (IOT) の専門講座シラバス - 本コースの学習内容
Arduino Environment
This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.
C Programming
This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.
Arduino Programs
This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.
Module 4
This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.
24%
30%
18%
The Arduino Platform and C Programming からの人気レビュー
A very good course to teach you the basics of Arduino platform and IDE. It'll help you get started on how to code your programs and lets you build up on it. I'd definitely recommend for a beginner.
very good course to have basic understanding of C programming software , Arduino software which is explained in a very simple language where i was finding difficult before attending this course
講師
Ian Harris
Professorカリフォルニア大学アーバイン校（University of California, Irvine）について
An Introduction to Programming the Internet of Things (IOT)の専門講座について
よくある質問
いつ講座や課題にアクセスできるようになりますか？
修了証に登録すると、すべてのビデオ、テスト、およびプログラミング課題（該当する場合）にアクセスできます。ピアレビュー課題は、セッションが開始してからのみ、提出およびレビューできます。購入せずにコースを検討することを選択する場合、特定の課題にアクセスすることはできません。
この専門講座をサブスクライブすると何を行うことができるようになりますか？
コースに登録する際、専門講座のすべてのコースにアクセスできます。コースの完了時には修了証を取得できます。電子修了証が成果のページに追加され、そこから修了証を印刷したり、LinkedInのプロフィールに追加したりできます。コースの内容の閲覧のみを希望する場合は、無料でコースを聴講できます。
返金ポリシーについて教えてください。
学資援助はありますか？
さらに質問がある場合は、受講者向けヘルプセンターにアクセスしてください。
