My experience with this course was very good. I learned a lot of manufacturing i.e. how a product is manufactured, what are the processes, how to code for CNC is generated and how a CNC machine works.
The first course with full hand-on for designing, engineering and optimizing the design.\n\nAutodesk Fusion 360 is great software for CAD/CAM/CAE combined in one. The UI is highly intuitive.
by YASHKUMAR B•
by Naresh K M•
by KLU_026 Y•
by KESAVENI S•
by SAHIL S A•
by Mahesh R•
by Sharath c G•
by Aqa B•
by Matt E•
Great course, but a little too much emphasis on building a drone, and not enough on the actual processes for manufacturing. Demonstration videos of the machines used (3D printers, Mills, multi-axis machines) would firm up an already good course and provide a visual aid to what the part being processed will result in, along with more hands on Fusion 360 manufacturing information would make this course excellent.
by Angelo T•
It would be nice to improve the CAD tutorials and make the drone assembly part an extra, since most of the students may not have access to the parts itself. Also make the tutors active, it lacks supervision in all the courses.
by VARUN . S•
good course but please remove peer review system instead of that instructor much check all designs because no everyone approve your work. so pleaseeeeee remove peers review.
by Harishkumar L G•
I loved the course. It was helpful for me to understand the adjustments that one must make to make the device as compact as we can
by Shadab A•
Peer Graded Assignment Review Need To Be Fast .. By The Way A Great Experience n Knowledge I Gain is Absolutely Incredible .
by Rajesh P•
I am grateful to take this course
by Prathamesh R•
I loved learning the corse.
by hemanth k r t•
It is awesome.
by Ahmed O•
by Janis A A•
The final assignment has literally nothing to do with CAM. Also half the course material has nothing to do with CAM, instead it is about picking components for a DIY drone. He doesn't do a great job explaining the CAM process either, a lot of the time he will just tell you what parameters to use where without giving any explanation of what it affects or the rationale behind the choice. Out of all the courses in this specialization this is the only one that disappointed me.
by Manish A•
Too much focus on the testing and formation process. Would love it if more modification existed on learning other manufacturing process like 3D printing.
by Lev G•
The final task is definitely not about manufacturing or Fusion 360. It's a regular engineering work that requires way more than couple hours to be done carefully (unless you design quadcopters for years).
I only finished it because it was the last task of the course series, but the task is completely irrelevant. It requires only extremely basic Fusion skills.
I would be much happier with some production-related task that suggests developing a part optimized for a prescribed set of manufacturing tools... or something like that.
The long discussion of the quadcopters on week4 was a complete waste of time for me. All discussions of the US flight regulation rules are not relevant for most of the students.
by Abhijeet S•
Like many have previously mentioned, this is more of a drone assembly course than a course that teaches you manufacturing in Autodesk Fusion 360. The content from the last two weeks is poor and goes extremely deep into the assembly of drones, and many of us only wanted to learn CAM, which is only scarcely covered within the first couple of weeks.
by Jens E•
For a week I've been waiting for the evaluation of my thesis of this course. The instructors on this course seem to be asleep. Damn idiots.