FPGA Capstone: Building FPGA Projects に戻る
コロラド大学ボルダー校（University of Colorado Boulder） による FPGA Capstone: Building FPGA Projects の受講者のレビューおよびフィードバック
13件の評価
コースについて
This course will give you hands-on FPGA design experience that uses all the concepts and skills you have developed up to now. You will need to purchase a DE10-Lite development kit. You will setup and test the MAX10 DE10-Lite board using the FPGA design tool Quartus Prime and the System Builder.
You will:
Design and test a Binary Coded Decimal Adder.
Design and test a PWM Circuit, with verification by simulation.
Design and test an ADC circuit, using Quartus Prime built-in tools to verify your circuit design.
Create hardware for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer). Instantiate this design into a top-level DE10-Lite HDL file.
Compile your completed hardware using Quartus Prime.
Enhance and test a working design, using most aspects of the Quartus Prime Design Flow and the NIOS II Software Build Tools (SBT) for Eclipse.
Create software for the NIOS II soft processor, including many interfaces, using Qsys (Platform Designer) and the SBT.
Compile your completed software using the SBT.
Use Quartus Prime to program both the FPGA hardware configuration and software code in you DE10-Lite development kit.
Record all your observations in a lab notebook pdf.
Submit your project files and lab notebook for grading.
This course consists of 4 modules, approximately 1 per week for 4 weeks. Each module will include an hour or less of video lectures, plus reading assignments, discussion prompts, and project assignment that involves creating hardware and/or software in the FPGA.
人気のレビュー
2021年5月28日
Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.
2021年1月27日
This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !
フィルター：
FPGA Capstone: Building FPGA Projects： 1 - 4 / 4 レビュー
by Dmitry K
•2021年5月29日
Requires knowledge of FPGA design flow (make sure to take 3 courses before this one), great practical tasks that complete the whole specialization.
by Ovidiu S
•2021年1月28日
This specialization has a very good balance between deepness and breadth of transmitted knowledge. Thank you !
by Carlos M
•2021年4月14日
Excellent course.
by Molin D
•2020年12月31日
This is a good course.
For some reason, I am looking for a course based on Xilinx FPGA. this one is based on Altera/Intel FPGA
Coursera Footer
©2022 Coursera Inc.All rights reserved.
