このコースについて

417,501 最近の表示

This course explores the topic of solid objects subjected to stress and strain. The methods taught in the course are used to predict the response of engineering structures to various types of loading, and to analyze the vulnerability of these structures to various failure modes. Axial loading with be the focus in this course.
------------------------------
The copyright of all content and materials in this course are owned by either the Georgia Tech Research Corporation or Dr. Wayne Whiteman. By participating in the course or using the content or materials, whether in whole or in part, you agree that you may download and use any content and/or material in this course for your own personal, non-commercial use only in a manner consistent with a student of any academic course. Any other use of the content and materials, including use by other academic universities or entities, is prohibited without express written permission of the Georgia Tech Research Corporation. Interested parties may contact Dr. Wayne Whiteman directly for information regarding the procedure to obtain a non-exclusive license.

受講生の就業成果

11%

コース終了後に新しいキャリアをスタートした

25%

コースが具体的なキャリアアップにつながった

14%

昇給や昇進につながった

共有できる証明書

修了時に証明書を取得

100%オンライン

自分のスケジュールですぐに学習を始めてください。

柔軟性のある期限

スケジュールに従って期限をリセットします。

約16時間で修了

英語

字幕：英語

受講生の就業成果

11%

コース終了後に新しいキャリアをスタートした

25%

コースが具体的なキャリアアップにつながった

14%

昇給や昇進につながった

共有できる証明書

修了時に証明書を取得

100%オンライン

自分のスケジュールですぐに学習を始めてください。

柔軟性のある期限

スケジュールに従って期限をリセットします。

約16時間で修了

英語

字幕：英語

シラバス - 本コースの学習内容

コンテンツの評価97%(11,463 件の評価)

週

1

週 1

1時間で修了

Welcome

1時間で修了

1件のビデオ（合計2分）, 3 readings

1件のビデオ

Course Introduction2 分

3件の学習用教材

Course Syllabus10 分

Consent Form10 分

Get More from Georgia Tech10 分

3時間で修了

Stress and Strain Fundamentals

In this section, we will study the fundamentals of stress and strain as applied to Mechanics of Materials.

3時間で修了

8件のビデオ（合計37分）, 14 readings, 1 quiz

8件のビデオ

Module 1: General Analysis Approach4 分

Module 2: Internal Forces due to External Loads2 分

Module 3: Normal Stress/Shear Stress3 分

Module 4: Maximum Normal and Shear Stress on Inclined Planes for Uniaxial Loading9 分

Module 5: General State of Stress at a Point (3D)8 分

Module 6: Two-Dimensional (2D) or Plane Stress2 分

Module 7: Nominal (Engineering) Stress and True Stress4 分

Module 8: Normal Strain2 分

14件の学習用教材

Download Pdf Format Module 1: General Analysis Approach10 分

Download Pdf Format Module 2: Internal Forces due to External Loads10 分

Download Pdf Format: Module 3: Normal Stress/Shear Stress10 分

Module 3 Worksheet Solution10 分

Download Pdf Format Module 4: Maximum Normal and Shear Stress on Inclined Planes for Uniaxial Loading10 分

Module 4 Worksheet Solution10 分

Download Pdf Format Module 5: General State of Stress at a Point (3D)10 分

Download Pdf Format Module 6: Two-Dimensional (2D) or Plane Stress10 分

Download Pdf Format Module 7: Nominal (Engineering) Stress and True Stress10 分

Module 7 Worksheet Solution10 分

Download Pdf Format Module 8: Normal Strain10 分

Module 8 Worksheet Solution10 分

Solution to Quiz Week One10 分

Earn a Georgia Tech Badge/Certificate/CEUs10 分

1の練習問題

Quiz on Stress and Strain Fundamentals6 分

週

2

週 2

3時間で修了

Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain

In this section, we will develop stress-strain diagrams, discuss material properties, and look more in depth at shear stress and strain.

3時間で修了

7件のビデオ（合計35分）, 11 readings, 1 quiz

7件のビデオ

Module 9: Tension Test and Stress-Strain Diagram10 分

Module 10: Internal Properties and Hooke’s Law4 分

Module 11: 0.2% Offset Yield Stress3 分

Module 12: Strain Hardening/Permanent Set1 分

Module 13: Poisson’s Ratio6 分

Module 14:Shear Stress/2D Pure Shear4 分

Module 15: Shear Strain4 分

11件の学習用教材

Download Pdf Format Module 9: Tension Test and Stress-Strain Diagram10 分

Download Pdf Format Module 10: Internal Properties and Hooke’s Law10 分

Module 10 Worksheet Solution10 分

Download Pdf Format Module 11: 0.2% Offset Yield Stress10 分

Module 11 Worksheet Solution10 分

Download Pdf Format Module 12: Strain Hardening/Permanent Set10 分

Download Pdf Format Module 13: Poisson’s Ratio10 分

Module 13 Worksheet Solution10 分

Download Pdf Format Module 14:Shear Stress/2D Pure Shear10 分

Download Pdf Format Module 15: Shear Strain10 分

Solution to Quiz Week Two10 分

1の練習問題

Quiz on Stress-Strain Diagrams, Material Properties, and Shear Stress and Strain6 分

週

3

週 3

4時間で修了

Stresses on Inclined Planes

In this section, we will develop the stress transformation equations for inclined planes and introduce Mohr’s Circle for Plane Stress

4時間で修了

11件のビデオ（合計68分）, 14 readings, 1 quiz

11件のビデオ

Module 16:Stresses on Inclined Planes – Sign Convention5 分

Module 17: Transformation Equations for Plane Stress8 分

Module 18: Principal Stresses/Principal Planes5 分

Module 19: Principal Stresses/Principal Planes (cont.)2 分

Module 20: Maximum and Minimum In-Plane Principal Stresses7 分

Module 21: Maximum In-Plane Shear Stress5 分

Module 22: Introduction to Mohr’s Circle4 分

Module 23: Mohr’s Circle for Plane Stress5 分

Module 24: Determine Principal Stresses, Principal Planes, and Maximum Shear Stress using Mohr’s Circle9 分

Module 25: Stresses on any given plane using Mohr’s Circle6 分

Module 26: Principal Stresses and Principal Planes by solving Eigenvalue Problem5 分

14件の学習用教材

Download Pdf Format Module 16:Stresses on Inclined Planes – Sign Convention10 分

Download Pdf Format Module 17: Transformation Equations for Plane Stress10 分

Module 17 Worksheet Solution10 分

Download Pdf Format Module 18: Principal Stresses/Principal Planes10 分

Download Pdf Format Module 19: Principal Stresses/Principal Planes (cont.)10 分

Download Pdf Format Module 20: Maximum and Minimum In-Plane Principal Stresses10 分

Download Pdf Format Module 21: Maximum In-Plane Shear Stress10 分

Module 21 Worksheet Solution10 分

Download Pdf Format Module 22: Introduction to Mohr’s Circle10 分

Download Pdf Format Module 23: Mohr’s Circle for Plane Stress10 分

Download Pdf Format Module 24: Determine Principal Stresses, Principal Planes, and Maximum Shear Stress using Mohr’s Circle10 分

Download Pdf Format Module 25: Stresses on any given plane using Mohr’s Circle10 分

Download Pdf Format Module 26: Principal Stresses and Principal Planes by solving Eigenvalue Problem10 分

Solution to Quiz Week Three10 分

1の練習問題

Quiz on Stresses on Inclined Planes6 分

週

4

週 4

3時間で修了

Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains

In this section, we will learn about stress concentrations, and discuss plane strain, develop Mohr’s Circle for Plane Strain, and explore methods of measuring strain.

3時間で修了

11件のビデオ（合計68分）, 12 readings, 1 quiz

11件のビデオ

Module 27: Stress Concentration Factors/Saint-Venant’s Principle5 分

Module 28: Determine Maximum Stress at Discontinuities using Stress Concentration Factors8 分

Module 29: Two-Dimensional (2D) or Plane Strain5 分

Module 30: Transformation Equations for Plane Strain8 分

Module 31: Transformation Equations for Plane Strain (cont.)1 分

Module 32: Mohr’s Circle for Plane Strain2 分

Module 33: Determine Principal Strains, Principal Planes, and Maximum Shear Strain using Mohr’s Circle9 分

Module 34: Strains on any given plane using Mohr’s Circle6 分

Module 35: Find Strains using Experimental Analysis Techniques5 分

Module 36: Find In-Plane Strains using Strain Gage Measurements7 分

Module 37: Find Principal Strains, Maximum Shear Strain, and Principal7 分

12件の学習用教材

Download Pdf Format Module 27: Stress Concentration Factors/Saint-Venant’s Principle10 分

Download Pdf Format Module 28: Determine Maximum Stress at Discontinuities using Stress Concentration Factors10 分

Download Pdf Format Module 29: Two-Dimensional (2D) or Plane Strain10 分

Download Pdf Format Module 30: Transformation Equations for Plane Strain10 分

Download Pdf Format Module 31: Transformation Equations for Plane Strain (cont.)10 分

Download Pdf Format Module 32: Mohr’s Circle for Plane Strain10 分

Download Pdf Format Module 33: Determine Principal Strains, Principal Planes, and Maximum Shear Strain using Mohr’s Circle10 分

Download Pdf Format Module 34: Strains on any given plane using Mohr’s Circle10 分

Download Pdf Format Module 35: Find Strains using Experimental Analysis Techniques10 分

Download Pdf Format Module 36: Find In-Plane Strains using Strain Gage Measurements10 分

Download Pdf Format Module 37: Find Principal Strains, Maximum Shear Strain, and Principal10 分

Solution to Quiz Week Four10 分

1の練習問題

Quiz on Stress concentrations, Mohr’s Circle for Plane Strain, and measuring strains6 分

週

5

週 5

3時間で修了

Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects

In this section, we will conclude the course by discussing the topics of the generalize Hooke’s Laws for Isotropic materials, factors of safety, nonlinear behavior and plasticity, statically indeterminate structures, and thermal effects in mechanics of materials.

3時間で修了

9件のビデオ（合計57分）, 12 readings, 1 quiz

9件のビデオ

Module 38: Generalized Hooke’s Laws for Isotropic Materials8 分

Module 39: Modulus of Elasticity, Modulus of Rigidity, and Poisson’s Ratio relationship for Isotropic Materials5 分

Module 40: Factor of Safety4 分

Module 41: Design to meet specified Factor of Safety5 分

Module 42: Idealized Elastoplastic Material Assumption2 分

Module 43: Solve a Statically Indeterminate Structure under Axial Loading14 分

Module 44: Temperature Effects on Engineering Materials5 分

Module 45: Solve an Engineering Problem with Thermal Effects7 分

Module 46: Course Conclusion2 分

12件の学習用教材

Download Pdf Format Module 38: Generalized Hooke’s Laws for Isotropic Materials10 分

Download Pdf Format Module 39: Modulus of Elasticity, Modulus of Rigidity, and Poisson’s Ratio relationship for Isotropic Materials10 分

Download Pdf Format Module 40: Factor of Safety10 分

Download Pdf Format Module 41: Design to meet specified Factor of Safety10 分

Module 41 Worksheet Solution10 分

Download Pdf Format Module 42: Idealized Elastoplastic Material Assumption10 分

Download Pdf Format Module 43: Solve a Statically Indeterminate Structure under Axial Loading10 分

Download Pdf Format Module 44: Temperature Effects on Engineering Materials10 分

Dowload Pdf Format Module 45: Solve an Engineering Problem with Thermal Effects10 分

Solution to Quiz Week five10 分

Download Pdf Format Module 46: Course Conclusion10 分

Where to go from here10 分

1の練習問題

Quiz on Generalized Hooke’s Laws, Factor of Safety, Non-linear behavior and Plasticity, Statically Indeterminate Structures, and Thermal Effects6 分

よくある質問

When will I have access to the lectures and assignments?
Access to lectures and assignments depends on your type of enrollment. If you take a course in audit mode, you will be able to see most course materials for free. To access graded assignments and to earn a Certificate, you will need to purchase the Certificate experience, during or after your audit. If you don't see the audit option:

The course may not offer an audit option. You can try a Free Trial instead, or apply for Financial Aid.

The course may offer 'Full Course, No Certificate' instead. This option lets you see all course materials, submit required assessments, and get a final grade. This also means that you will not be able to purchase a Certificate experience.
What will I get if I purchase the Certificate?

When you purchase a Certificate you get access to all course materials, including graded assignments. Upon completing the course, your electronic Certificate will be added to your Accomplishments page - from there, you can print your Certificate or add it to your LinkedIn profile. If you only want to read and view the course content, you can audit the course for free.
What is the refund policy?

You will be eligible for a full refund until two weeks after your payment date, or (for courses that have just launched) until two weeks after the first session of the course begins, whichever is later. You cannot receive a refund once you’ve earned a Course Certificate, even if you complete the course within the two-week refund period. See our full refund policy.
Is financial aid available?

Yes, Coursera provides financial aid to learners who cannot afford the fee. Apply for it by clicking on the Financial Aid link beneath the "Enroll" button on the left. You’ll be prompted to complete an application and will be notified if you are approved. Learn more.

さらに質問がある場合は、受講者向けヘルプセンターにアクセスしてください。

Mechanics of Materials I: Fundamentals of Stress & Strain and Axial Loading